- Table View
- List View
Advances in Electrical Systems and Innovative Renewable Energy Techniques: The Proceedings of the International Conference on Electrical Systems and Automation (Volume 1) (Advances in Science, Technology & Innovation)
by Mohamed Bendaoud Amine El Fathi Farhad Ilahi Bakhsh Siano PierluigiThis edited book on “Advances in Electrical Systems and Innovative Renewable Energy Techniques” is an outcome of the selected papers presented at the International Conference on Electrical Systems & Automation, (ICESA 2023) held from 29 to 30, May 2023 at the Faculty of Sciences and technologies, Al Hoceïma, Morocco.This edited book is divided into 2 volumes. This volume will be divided into 3 parts, each devoted to distinct yet interconnected aspects of the subject matter.The first part focuses on various advancements in renewable energy techniques. It explores topics ranging from biomass combustion characteristics and hydrogen production using photovoltaics to the assessment of wave energy potential and the performance evaluation of solar collectors. These research papers not only shed light on the current state-of-the-art technologies but also offer valuable insights into their implementation, efficiency, and potential impact on the energy landscape.The second part focuses on interdisciplinary approaches between electrical and renewable energy systems and includes research chapters on photovoltaic (PV) energy, wind energy, and microgrid systems.For PV systems, several topics and issues are addressed such as modeling of PV systems using single diode model and double diode model; analytical and numerical methods for extraction of PV parameters; extraction of maximum power from PV system using integral SMC strategy, sun-pointing orientation, SuDoKu, and ANN algorithms; and fault detection and classification based on metaheuristic technique, and feedforward neural network.For the wind system, its modeling is first discussed, and then the control of the wind system using direct power, PI, fuzzy logic, sliding mode, and time delay strategies is analyzed.In the third part, the chapters focus on efficient energy management, optimization of microgrids, and the use of advancedtechnologies to improve energy performance. Researchers present innovative solutions to address the challenges of energy efficiency, grid responsiveness, and the integration of new energy sources.
Advances in Electromechanical Technologies: Select Proceedings of TEMT 2019 (Lecture Notes in Mechanical Engineering)
by P. M. Pandey V. C. Pandey S. K. GargThis book comprises select peer-reviewed papers from the International Conference on Emerging Trends in Electromechanical Technologies & Management (TEMT) 2019. The focus is on current research in interdisciplinary areas of mechanical, electrical, electronics and information technologies, and their management from design to market. The book covers a wide range of topics such as computer integrated manufacturing, additive manufacturing, materials science and engineering, simulation and modelling, finite element analysis, operations and supply chain management, decision sciences, business analytics, project management, and sustainable freight transportation. The book will be of interest to researchers and practitioners of various disciplines, in particular mechanical and industrial engineering.
Advances in Electronics, Communication and Computing: Select Proceedings of ETAEERE 2020 (Lecture Notes in Electrical Engineering #709)
by Akash Kumar Bhoi Pradeep Kumar Mallick Gyoo-Soo Chae Kanak KalitaThis book comprises select proceedings of the international conference ETAEERE 2020, and covers latest research in the areas of electronics, communication and computing. The book includes different approaches and techniques for specific applications using particle swarm optimization, Otsu’s function and harmony search optimization algorithm, DNA-NAND gate, triple gate SOI MOSFET, micro-Raman and FTIR analysis, high-k dielectric gate oxide, spectrum sensing in cognitive radio, microstrip antenna, GPR with conducting surfaces, energy efficient packet routing, iBGP route reflectors, circularly polarized antenna, double fork shaped patch radiator, implementation of Doppler radar at 24 GHz, iris image classification using SVM, digital image forgery detection, secure communication, spoken dialog system, and DFT-DCT spreading strategies. Given the range of topics covered, this book can be useful for both students and researchers working in electronics and communication.
Advances in Electronics, Communication and Computing: ETAEERE-2016 (Lecture Notes in Electrical Engineering #443)
by Kalpana Sharma Swagatam Das Akhtar KalamThis book is a compilation of research work in the interdisciplinary areas of electronics, communication, and computing. This book is specifically targeted at students, research scholars and academicians. The book covers the different approaches and techniques for specific applications, such as particle-swarm optimization, Otsu's function and harmony search optimization algorithm, triple gate silicon on insulator (SOI)MOSFET, micro-Raman and Fourier Transform Infrared Spectroscopy (FTIR) analysis, high-k dielectric gate oxide, spectrum sensing in cognitive radio, microstrip antenna, Ground-penetrating radar (GPR) with conducting surfaces, and digital image forgery detection. The contents of the book will be useful to academic and professional researchers alike.
Advances in Embedded Computer Vision (Advances in Computer Vision and Pattern Recognition)
by Branislav Kisačanin Margrit GelautzThis illuminating collection offers a fresh look at the very latest advances in the field of embedded computer vision. Emerging areas covered by this comprehensive text/reference include the embedded realization of 3D vision technologies for a variety of applications, such as stereo cameras on mobile devices. Recent trends towards the development of small unmanned aerial vehicles (UAVs) with embedded image and video processing algorithms are also examined. Topics and features: discusses in detail three major success stories - the development of the optical mouse, vision for consumer robotics, and vision for automotive safety; reviews state-of-the-art research on embedded 3D vision, UAVs, automotive vision, mobile vision apps, and augmented reality; examines the potential of embedded computer vision in such cutting-edge areas as the Internet of Things, the mining of large data streams, and in computational sensing; describes historical successes, current implementations, and future challenges.
Advances in Emerging Financial Technology and Digital Money
by Yassine Maleh Justin Zhang Abderrahim HansaliThe financial sector is witnessing rapid technological innovations, leading to the emergence of Fintech (financial technologies), revolutionizing national and international financial landscapes. Fintech is expanding and enhancing financial products and services, making them more accessible and affordable while transforming customer relationships, payment methods, financing, and transfers.Advances in Emerging Financial Technology and Digital Money provides a platform for collective reflection, bringing together institutions, policymakers, digital and financial service providers, professionals, and academics from various disciplines. The aim is to clarify the challenges, opportunities, and socio-economic impacts of innovations in finance and technology on citizens and businesses in Morocco, Africa, and worldwide. This comprehensive collection offers valuable insights into the current state and prospects of financial technology and digital money.This book covers all the essential topics, including: AI and Machine Learning in Fintech and Beyond Financial Inclusion, Literacy, and Behavior Fintech Ecosystems, Collaboration, and Analysis Blockchain, Security, and Sustainability Fintech Innovations and Applications In this new book, the authors share their experiences to provide a comprehensive and well‑researched overview of the technologies and concepts that will transform the banking industry as we know it. It aspires to be a useful reference for executive managers, CIOs, Fintech professionals, and researchers interested in exploring and implementing an efficient Fintech strategy. The book also presents selected papers from International Fintech Congress (IFC 2022).
Advances in Emerging Information and Communication Technology (Signals and Communication Technology)
by Asadullah Shaikh Abdullah Alghamdi Qing Tan Ibrahiem M. M. El EmaryThe book presents the proceedings of the International Conference on Innovation of Emerging Communication and Information Technology (ICIEICT 2023), which took place September 11 to 13, 2023, virtually and in Madrid, Spain. The conference is devoted to communication, computer science, electrical and electronics engineering, telecommunication engineering, and information technology. The conference is intended to provide a forum for research scientists, engineers, educators, and practitioners throughout the world to learn, share knowledge, publish, and disseminate the most recent innovations and developments, ideas, and applications in all fields of science, technology and information technology.
Advances in Emerging Trends and Technologies: Proceedings of ICAETT 2020 (Advances in Intelligent Systems and Computing #1302)
by Miguel Botto-Tobar Omar S. Gómez Raúl Rosero Miranda Angela Díaz CadenaThis book constitutes the proceedings of the 2nd International Conference on Advances in Emerging Trends and Technologies (ICAETT 2020), held in Riobamba, Ecuador, on 26–30 October 2019, proudly organized by Facultad de Informática y Electrónica (FIE) at Escuela Superior Politécnica de Chimborazo and supported by GDEON. ICAETT 2020 brings together top researchers and practitioners working in different domains of computer science to share their expertise and to discuss future developments and potential collaborations. Presenting high-quality, peer-reviewed papers, the book discusses the following topics: Communicationse-Government and e-Participatione-LearningElectronicIntelligent SystemsMachine VisionSecurityTechnology Trends
Advances in Emerging Trends and Technologies: Volume 2 (Advances in Intelligent Systems and Computing #1067)
by Miguel Botto-Tobar Joffre León-Acurio Angela Díaz Cadena Práxedes Montiel DíazThis book constitutes the proceedings of the 1st International Conference on Advances in Emerging Trends and Technologies (ICAETT 2019), held in Quito, Ecuador, on 29–31 May 2019, jointly organized by Universidad Tecnológica Israel, Universidad Técnica del Norte, and Instituto Tecnológico Superior Rumiñahui, and supported by SNOTRA. ICAETT 2019 brought together top researchers and practitioners working in different domains of computer science to share their expertise and to discuss future developments and potential collaborations. Presenting high-quality, peer-reviewed papers, the book discusses the following topics:Technology TrendsElectronicsIntelligent SystemsMachine VisionCommunicationSecuritye-Learninge-Businesse-Government and e-Participation
Advances in Emerging Trends and Technologies: Volume 1 (Advances in Intelligent Systems and Computing #1066)
by Miguel Botto-Tobar Joffre León-Acurio Angela Díaz Cadena Práxedes Montiel DíazThis book constitutes the proceedings of the 1st International Conference on Advances in Emerging Trends and Technologies (ICAETT 2019), held in Quito, Ecuador, on 29–31 May 2019, jointly organized by Universidad Tecnológica Israel, Universidad Técnica del Norte, and Instituto Tecnológico Superior Rumiñahui, and supported by SNOTRA. ICAETT 2019 brought together top researchers and practitioners working in different domains of computer science to share their expertise and to discuss future developments and potential collaborations. Presenting high-quality, peer-reviewed papers, the book discusses the following topics:Technology TrendsElectronicsIntelligent SystemsMachine VisionCommunicationSecuritye-Learninge-Businesse-Government and e-Participation
Advances in Engineering and Information Science Toward Smart City and Beyond (Engineering Cyber-Physical Systems and Critical Infrastructures #5)
by Ryoichi Shinkuma Fatos Xhafa Takayuki NishioThis book presents advances on the state of the art in smart cities systems and applications based on the proof of concept and prototyping for smart cities in an interdisciplinary context of engineering and information sciences. Smart cities have emerged as highly complex technological endeavors that combine knowledge and technology from many disciplines ranging from information sciences to engineering. Due to their complex nature, the modeling, development, and prototyping of applications in smart cities present a myriad of challenges, including technical, economic, and social ones, across application subdomains such as smart transportation, social welfare, tourism, and smart industry. It becomes difficult or sometimes impossible to provide a solution for such potential research issues and challenges from a traditional disciplinary-approach only; to tackle such research issues and to make the paradigm of smart cities a reality, interdisciplinary approaches are deemed necessary. Readers, developers, practitioners, and policy-makers in the field find in the book insights, experiences, findings, and perspectives on smart cities applications with an emphasis on real-life prototyping, beyond the confines of laboratory experiments.
Advances in Engineering Design: Select Proceedings of FLAME 2020 (Lecture Notes in Mechanical Engineering)
by Preeti Joshi Shakti S. Gupta Anoop Kumar Shukla Sachin Singh GautamThis book presents select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2020). The book focuses on latest research in mechanical engineering design and covers topics such as computational mechanics, finite element modeling, computer aided engineering and analysis, fracture mechanics, and vibration. The book brings together different aspects of engineering design and the contents will be useful for researchers and professionals working in this field.
Advances in Engineering Design: Select Proceedings of FLAME 2018 (Lecture Notes in Mechanical Engineering)
by Anamika Prasad Shakti S. Gupta R. K. TyagiThis book presents select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018). The book covers mechanical design areas such as computational mechanics, finite element modeling, computer aided designing, tribology, fracture mechanics, and vibration. The book brings together different aspects of engineering design, and will be useful for researchers and professionals working in this field.
Advances in Engineering Design: Select Proceedings of FLAME 2022 (Lecture Notes in Mechanical Engineering)
by Rohit Sharma Ravindra Kannojiya Naveen Garg Sachin S. GautamThis volume comprises the select proceedings of the 3rd Biennial International Conference on Future Learning Aspects of Mechanical Engineering (FLAME) 2022. It aims to provide a comprehensive and broad-spectrum picture of the state-of-the-art research and development in engineering design. Various topics covered include engineering system, synthesis of mechanism, failure analysis, solid and structural mechanics, contact mechanics, multi-body dynamics, fracture mechanics, vibration and acoustics, etc. This volume will prove a valuable resource for researchers and professionals in the area of mechanical engineering, especially engineering design and allied fields.
Advances in Engineering Design and Simulation: Select Proceedings of NIRC 2018 (Lecture Notes on Multidisciplinary Industrial Engineering)
by Chenfeng Li U. Chandrasekhar Godfrey OnwuboluThis book consists of selected peer-reviewed papers presented at the NAFEMS India Regional Conference (NIRC 2018). It covers current topics related to advances in computer aided design and manufacturing. The book focuses on the latest developments in engineering modelling and simulation, and its application to various complex engineering systems. Finite element method/finite element analysis, computational fluid dynamics, and additive manufacturing are some of the key topics covered in this book. The book aims to provide a better understanding of contemporary product design and analyses, and hence will be useful for researchers, academicians, and professionals.
Advances in Engineering Research and Application: Proceedings of the International Conference, ICERA 2018 (Lecture Notes in Networks and Systems #63)
by Hamido Fujita Duy Cuong Nguyen Ngoc Pi Vu Tien Long Banh Hermann Horst PutaThe International Conference on Engineering Research and Applications (ICERA 2018), which took place at Thai Nguyen University of Technology, Thai Nguyen, Vietnam on December 1–2, 2018, provided an international forum to disseminate information on latest theories and practices in engineering research and applications. The conference focused on original research work in areas including Mechanical Engineering, Materials and Mechanics of Materials, Mechatronics and Micro Mechatronics, Automotive Engineering, Electrical and Electronics Engineering, Information and Communication Technology. By disseminating the latest advances in the field, The Proceedings of ICERA 2018, Advances in Engineering Research and Application, helps academics and professionals alike to reshape their thinking on sustainable development.
Advances in Enterprise Engineering X: 6th Enterprise Engineering Working Conference, EEWC 2016, Funchal, Madeira Island, Portugal, May 30-June 3 2016, Proceedings (Lecture Notes in Business Information Processing #252)
by David Aveiro Robert Pergl Duarte GouveiaThis book constitutes the proceedings of the 6th Enterprise Engineering Working Conference (EEWC), held in Funchal, Madeira Island, Portugal, on May 30 - June 3, 2016. EEWC aims at addressing the challenges that modern and complex enterprises are facing in a rapidly changing world. The participants of the working conference share a belief that dealing with these challenges requires rigorous and scientific solutions, focusing on the design and engineering of enterprises. The goal of EEWC is to stimulate interaction between the different stakeholders, scientists as well as practitioners, interested in making Enterprise Engineering a reality. The 12 full papers presented were carefully reviewed and selected out of 34 submissions. The topics of the presented papers allowed for active participation in interesting discussions and exchange of ideas and stimulated future cooperation among the participants. This made EEWC a real working conference contributing to the further development of Enterprise Engineering as a mature discipline. Topics covered include: Organization Implementation; Value and Co-Creation; Evolvability; Modelling, Patterns and Viability; and Foundations of Enterprise Engineering.
Advances in Enterprise Engineering XI: 7th Enterprise Engineering Working Conference, EEWC 2017, Antwerp, Belgium, May 8-12, 2017, Proceedings (Lecture Notes in Business Information Processing #284)
by David Aveiro, Robert Pergl, Giancarlo Guizzardi, João Paulo Almeida, Rodrigo Magalhães and Hans LekkerkerkThis book constitutes the proceedings of the 7th Enterprise Engineering Working Conference, EEWC 2017, held in Antwerp, Belgium, in May 2017. EEWC aims at addressing the challenges that modern and complex enterprises are facing in a rapidly changing world. The participants of the working conference share a belief that dealing with these challenges requires rigorous and scientific solutions, focusing on the design and engineering of enterprises. The goal of EEWC is to stimulate interaction between the different stakeholders, scientists as well as practitioners, interested in making Enterprise Engineering a reality.The 12 full papers and 4 short papers presented in this volume were carefully reviewed and selected from 40 submissions. They were organized in topical sections named: formalisms; standards and laws; business processes; normalized systems and evolvability; ontologies; and organization design.
Advances in Enterprise Engineering XIII: 9th Enterprise Engineering Working Conference, EEWC 2019, Lisbon, Portugal, May 20–24, 2019, Revised Papers (Lecture Notes in Business Information Processing #374)
by David Aveiro Giancarlo Guizzardi José BorbinhaThis book constitutes the proceedings of the 9th Enterprise Engineering Working Conference, EEWC 2019, held in Lisbon, Portugal, May 2019. EEWC aims at addressing the challenges that modern and complex enterprises are facing in a rapidly changing world. The participants of the working conference share a belief that dealing with these challenges requires rigorous and scientific solutions, focusing on the design and engineering of enterprises. The goal of EEWC is to stimulate interaction between the different stakeholders, scientists as well as practitioners, interested in making Enterprise Engineering a reality. The 8 full papers and 3 short papers presented in this volume were carefully reviewed and selected from 22 submissions. They were organized in topical sections on processes; DEMO; models and enterprise architecture; and blockchain.
Advances in Enterprise Engineering XIV: 10th Enterprise Engineering Working Conference, EEWC 2020, Bozen-Bolzano, Italy, September 28, October 19, and November 9–10, 2020, Revised Selected Papers (Lecture Notes in Business Information Processing #411)
by David Aveiro Giancarlo Guizzardi Robert Pergl Henderik A. ProperThis book constitutes the proceedings of the 10th Enterprise Engineering Working Conference, EEWC 2020, which was planned to take place in Bozen-Bolzano, Italy, and had to change to an online event due to the COVID 19 pandemic. The online event took place on September 28, 2020, October 19, 2020, and November 9–10, 2020.EEWC aims at addressing the challenges that modern and complex enterprises are facing in a rapidly changing world. The participants of the working conference share a belief that dealing with these challenges requires rigorous and scientific solutions, focusing on the design and engineering of enterprises. The goal of EEWC is to stimulate interaction between the different stakeholders, scientists as well as practitioners, interested in making Enterprise Engineering a reality. The 8 full papers and 2 short papers presented in this volume were carefully reviewed and selected from 23 submissions. The volume also contains 3 keynote papers in full paper length. The papers were organized in topical sections as follows: formal approaches and modeling; the DEMO modeling language; and enterprise engineering practice.
Advances in Enterprise Engineering XV: 11th Enterprise Engineering Working Conference, EEWC 2021, Virtual Event, November 12, 2021, and December 16–17, 2021, Revised Selected Papers (Lecture Notes in Business Information Processing #441)
by David Aveiro Henderik A. Proper Sérgio Guerreiro Marne De VriesThis book constitutes the proceedings of the 11th Enterprise Engineering Working Conference, EEWC 2021, which was held online on November 12, 2021, and December 16-17, 2021.EEWC aims at addressing the challenges that modern and complex enterprises are facing in a rapidly changing world. The participants of the working conference share a belief that dealing with these challenges requires rigorous and scientific solutions, focusing on the design and engineering of enterprises. The goal of EEWC is to stimulate interaction between the different stakeholders, scientists as well as practitioners, interested in making Enterprise Engineering a reality. The 5 full papers and 3 short papers presented in this volume were carefully reviewed and selected from 16 submissions. The volume also contains 2 keynote papers.
Advances in Enterprise Engineering XVI: 12th Enterprise Engineering Working Conference, EEWC 2022, Leusden, The Netherlands, November 2–3, 2022, Revised Selected Papers (Lecture Notes in Business Information Processing #473)
by Cristine Griffo Sérgio Guerreiro Maria E. IacobThis book constitutes the refereed proceedings of the 12th Enterprise Engineering Working Conference on Advances in Enterprise Engineering XVI, EEWC 2022, held in Leusden, The Netherlands, November 2–3, 2022. EEWC aims at addressing the challenges that modern and complex enterprises are facing in a rapidly changing world. The participants of the working conference share a belief that dealing with these challenges requires rigorous and scientific solutions, focusing on the design and engineering of enterprises. The goal of EEWC is to stimulate interaction between the different stakeholders, scientists as well as practitioners, interested in making Enterprise Engineering a reality. The 4 full papers and 2 short papers included in this book were carefully reviewed and selected from 13 submissions. In addition, there are 2 invited papers from keynote presentations. They were organized in topical sections as follows: Invited Papers from Keynote Presentations and Presented Papers.
Advances in Enterprise Engineering XVII: 13th Enterprise Design and Engineering Working Conference, EDEWC 2023, Vienna, Austria, November 28–29, 2023, Revised Selected Papers (Lecture Notes in Business Information Processing #510)
by Monika Malinova Mandelburger Sérgio Guerreiro Cristine Griffo David Aveiro Henderik A. Proper Marianne SchnellmannThis book constitutes the refereed proceedings of the 13th Enterprise Design and Engineering Working Conference on Advances in Enterprise Engineering XVII, EDEWC 2023, held in Vienna, Austria, during November 27–28, 2023. Enterprise design and engineering aims to take an integrative and engineering-oriented perspective to enterprise development management. As such, it considers enterprises as purposefully designed systems where all relevant aspects should be designed in coherence. The new scope of EDEWC reflects the rapid increase in digitization of enterprises in the last decade. This has resulted in a substantial change in the nature and structure of enterprises, which was the main focus of EDEWC 2023. The 5 full papers and 2 short papers included in this book were carefully reviewed and selected from 15 submissions.
Advances in Ergonomics in Design: Proceedings of the AHFE 2021 Virtual Conference on Ergonomics in Design, July 25-29, 2021, USA (Lecture Notes in Networks and Systems #261)
by Francisco RebeloThis book provides readers with a timely snapshot of ergonomics research and methods applied to the design, development and evaluation, of products, systems and services. It gathers theoretical contributions, case studies and reports on technical interventions focusing on a better understanding of human machine interaction, and user experience for improving product design. The book covers a wide range of established and emerging topics in user-centered design, relating to design for special populations, design education, workplace assessment and design, anthropometry, ergonomics of buildings and urban design, sustainable design, as well as visual ergonomics and interdisciplinary research and practices, among others. Based on the AHFE 2021 International Conference on Ergonomics in Design, held virtually on 25–29 July, 2021, from USA, the book offers a thought-provoking guide for both researchers and practitioners in human-centered design and related fields.
Advances in Ergonomics in Design: Proceedings of the AHFE 2020 Virtual Conference on Ergonomics in Design, July 16–20, 2020, USA (Advances in Intelligent Systems and Computing #1203)
by Francisco Rebelo Marcelo SoaresThis book provides readers with a timely snapshot of ergonomics research and methods applied to the design, development and prototyping—as well as the evaluation, training and manufacturing—of products, systems and services. Combining theoretical contributions, case studies and reports on technical interventions, it covers a wide range of topics in ergonomic design including ecological design; cultural and ethical aspects in design; interface design, user involvement and human–computer interaction in design; as well as design for accessibility and many others. The book particularly focuses on new technologies such as virtual reality, state-of-the-art methodologies in information design, and human–computer interfaces. Based on the AHFE 2020 Virtual Conference on Ergonomics in Design, held on July 10–16, 2020, the book offers a timely guide for both researchers and design practitioners, including industrial designers, human–computer interaction and user experience researchers, production engineers and applied psychologists.